With the tolerance of PCB drills limited to mere microns, we have developed different measuring instruments to ensure a high level of quality.
Ring Setting Machines
Union Tool manufactures a wide range of semi-automatic and automatic non-contact ring setting machines for both drills and routers down to 0.05 mm in diameter.
Union Tool manufactures a wide range of semi-automatic and automatic repointing machines for repointing drills down to 0.15 mm in diameter.
These will help to produce the maximum level of drill performance, for effective and functional use of PCB drills.
PCB Measuring Devices
RI V plus
Die & Mould Measuring Devices
Union Tool’s micro tool measuring equipment is specificially designed to deal with miniature sized tools rotating at high speeds. Spindle runout can be measured as well as the external diameter of tools. Our measuring devices also have BCD parallel data output, allowing them to be connected to external machines for easier data analysis.
Easy setting due to the combined display and measurement unit.
Measure a wide range of diameter (Ø 0.2 ~ 25 mm), due to the laser application.
Set the most suitable milling condition by spindle runout detectable function.
Detecting tip point enables to measure chipping and wearing amount of actual milling tools.
Easy to check spindle conditions.
It can measure the amount of spindle runout using a pin gauge.
It has a BCD parallel output interface, enabling easy connection with external devices.
Measuring dynamic runout (while rotating) of the cutting edges make it possible to enhance machining expertise in ways that improve machined forms and surface roughness, and extend tool life.
This instrument can also be used for maintenance and inspection of the spindle system of the machine.